The CK Series is Designed for farmers and ranchers who require more power and performance in a compact tractor.
Power: The CK4010SE is powered by a three-cylinder naturally aspirated diesel engine displacing 111.4 cubic inches. ECO Tech technologies including common rail injection and a diesel particulate filter (DPF) to achieve EPA Final Tier 4 (FT4) compliance without the need of diesel exhaust fluid (DEF) additions. Output at 2600 rpm is 39.6 gross and 33.5 horsepower at the power take-off (PTO).
Hydraulic: A tandem pump arrangement flows 4.6 gpm to the power steering circuit and 7.1 gpm to implement demand. This gives the Cat I three-point hitch (3PH) a lift capacity of 1,631 lbs measured 24” aft. Position control is standard, so an implement can be returned to a preset position time after time. Lower link ends telescope for ease of attachment as do the outboard pin adjustable stabilizers. Up to two rear remotes are supported (optional). A heavy-duty 1-3/4” thick drawbar is standard.
Capacity: The loader has a lift capacity of 1835 lbs to a max height of 98.4”. Dump clearance is 79.1” so most pickup/trailer combinations would easily be cleared. Dig depth is 5.3” with a break-out force rating of 3464 lbs at a system pressure of 2560 psi.
• 13.4" Ground Clearance
• Single Lever multi-position Joystick
• 3-Point Control Lever
• 40 HP Diesel with Reduced Noise Levels